LCA-B SB1-2

Application :
Used for Double frame floor scale
Features :
High ability of anti side loading, lateral forcing, easy installation and dislocation of steel ball can be corrected automaticallyOUTLINE DIMENSION IN (mm) :

LCA-B SB3

LCA-F SB1-2

Application :
Used for Single frame floor scale

Features :
High ability of anti side loading, height adjustable, easy installation and with a steel ball a steel ball inside to center automatically

OUTLINE DIMENSION IN (mm) :

LCA-F SB3

Application :
Used for Single frame floor scale

Features :
High ability of anti side loading, height adjustable, easy installation and with a steel ball inside to center automatically

OUTLINE DIMENSION IN (mm) :

LCA-M CP1

Anti turn over, correct dislocation automatically, restrict horizontal movement ,compact structure, easy installation and with cable earth

OUTLINE DIMENSION IN (mm):

LCA-M DE9

OUTLINE DIMENSION IN (mm):

LCA-M CD5

Anti turn over, correct dislocation automatically, restrict horizontal movement, compact structure, easy installation and with cable earth

OUTLINE DIMENSION IN (mm) :

AC-US JBD

unction box is an important accessory of load cells which is used for adjusting the balance of scales.
As the material and producing technique’s difference, the load cell’s parameter is discrepancy And the sensitivity of load cell mainly results in the unbalance of scale among many parameters.
Here we can adjust the scale balance by adjusting the potentiometer in the junction box.

FEATURES:

There are 3 type connection number of load cell : 4CH , 6CH , 8CH
Made by aluminium housing(Model : JBA) / stainless steel(Model: JBS) , with special plug, well sealed
With high precision, low excursion of resistance and potentiometer to confirm the system’s good reliability
There is a hole that could be used for welding the cable besides the connector. So you can select: connect cables by welding or plugging.
The PCB is welded with anti thunder and anti surge apparatus, it could be effective to avoid the load cell and indicator ‘s damage by thunder and surge.
Operating temperature : -40˚C~ +85˚C
IP65

AC-US JBS

Junction box is an important accessory of load cells which is used for adjusting the balance of scales.
As the material and producing technique’s difference, the load cell’s parameter is discrepancy And the sensitivity of load cell mainly results in the unbalance of scale among many parameters.
Here we can adjust the scale balance by adjusting the potentiometer in the junction box.

FEATURES:

There are 3 type connection number of load cell : 4CH , 6CH , 8CH
Made by aluminium housing(Model : JBA) / stainless steel(Model: JBS) , with special plug, well sealed
With high precision, low excursion of resistance and potentiometer to confirm the system’s good reliability
There is a hole that could be used for welding the cable besides the connector. So you can select: connect cables by welding or plugging.
The PCB is welded with anti thunder and anti surge apparatus, it could be effective to avoid the load cell and indicator ‘s damage by thunder and surge.
Operating temperature: -40˚C~ +85˚C
IP65

AC-US CV

FEATURES:

Smart USB to RS-232 interface
Support various serial devices
Easy plug and play installation
Provides dual buffers for upstream and downstream data transfer
Bus powered - no separate powersupply or battery required

AC-US TR 108

US TR-108 light isolation interface transmitter. Compatible RS-232C, RS-422, RS-485 standard, can transfer signal end RS232 signal to balance difference RS-422 or RS-485 signal, inner photo electricity isolation transmitter and DC/DC direct current transmitter, can supply 3500V isolation voltage, double – quick twinkling voltage suppresser (TVS) can effectively restrain lightning and ESD, can supply 600W per wire thunder surge protective, can effectively prevent thunder and shear earth interfere. RS-232 port can connect with PC, IPC or laptop with a DB9 female connector. RS-422, RS-485 port can connect using a 7 bit connection extremity. Because RS-485 support 2 wire semi duplex, that is to say RS-485 only has 2 circuitries (not only sending data, but also receiving data), handshake signal (e g RTS, Request To Send) normally control the direction of the data sending,
USTR-108 inner circuit can automatically feel the data stream direction, and automatically switch control, can conveniently compose a RS-485 work net no need any handshake signal. Such RS-485 control is full transparent, no need do any revise to the previous RS232 working.
US TR-108 can provide dependable connection to point to point or point to more point communication. Point to more point can allow to connect with 32 pcs RS-422 or RS-485 interface equipment. Data communication rate from 0 to 115.2 KBPS, 3 power supplies and data flux indicator light can indicate the failure instance, support the communication mode RS-232C to RS-422, RS-232 to RS-485 transfer point to point, or point to more points com.
Performance Parameter :

Interface characteristic : interface compatible EIA/TIA RS-232C, RS485/RS-422
Electric interface:

* RS-232C interface DB9 hole type linker.
* RS422/RS-485 interface hole type linker

Transfers Medium : Twisted-pair or shield wire.
Working: a synchronism semi duplex or a synchronism duplex.
Signal Indication : 3 signal indicator lights TXD, RXD, POWER
Isolation degree : Isolated voltage 3500VRMS , 500VDCseries
Transfer rate : 115.2 kbps to 1.2 km , 38.4 kbps to 2.4 km
Protect class : RS-232 interface ±15 KV ESD protective. RS-422, RS-485 interface1000W per wire thunder surge protective.
Transfer distance : 0-5 kilometer (115200-9600BPS)
Size : 125mm × 54mm × 25mm

Working environment : -25°C - +70°C, relative humidity 5%-95%

AC-US TR 420

FEATURES:

Safe,reliable, strong anti-jamming,inner setting input and output protecting circuit.
High precision,low temperature floating,adopt super-low temp.
Floating resistance and precision discharge.
Adjust cope width,easy to use, zero and full degree no effect each other.
More kinds of output signal, especially better for industrial control occasion use.
Classical simulating circuit construction, without MCU

AC-US TP 16S

Ticket printer Model US TP - 16S, can connected with indicator USI

Features :
compatible with RS-232 standard,the form for D-25 cellular type interface,can used standard of computer serial port connect directly and with PC’s RS-232C serial interface connect it can choose the baud rate and parity for match with other devices.

AC-US SB

FEATURES :
USSB Display can be used to display all kind of electronic equipments readout. It is very reliable, and easy to install and read microcontroller controlled bright LED segments readout device. It can be read easily in indoor or outdoor, day or night, and in all kind of environment.

ELECTRICAL :

Operating Temperature: -10˚C to +40˚C
Operating Humility: < 90%
Operating Environment Brightness: 0 to 10000 LX
Input Voltage: 187 to 242Vac 50HZ

DIMENSION :

MODEL	DIGIT HEIGHT	PHYSICAL DIMENSION	LED TYPE
USSB-8”	200mm	900 x 320 x 78	Segment
USSB-5 D“	130mm	780 x 400 x 58	Segment (Luxury Model)
USSB-5”	130mm	670 x 270 x 58	Segment (Economical Model)
USSB-3”	58mm	430 x 185 x 55	Segment

INPUT CONNECTION :

RS-232 (TXD only) continuous output of 8 digits.
Note that all equipments RS-232 connection may not be compatible,
Auto Detect Equipment Models

AC-US CB

Cable PC to score board used for connected from computer to score board standard plugDB9 female to computer and standard plug DB9 female to score board Model US SB.

AC-US CB-RS

AC-Software Scale Think

Weigh management software Scale Think is design by UScell for provide a scale system
This software special for Truck scale application.

FEATURES :

Applied for truck scale digital and analog using indicator
Directly connect with digital load cell without indicator
Connect with score board by software
User manage with password
Serial number of ticket, Truck no. , sender name, receiver name, goods name, specification of goods, discount of weight value and price
Memory tare weight of truck
Print ticket and report
Can design the format print and size of paper depend customer need
Use software USB key ( softdog ) for each PC